Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: rkd on January 23, 2007, 11:35:37 AM

Title: Lead-in Question
Post by: rkd on January 23, 2007, 11:35:37 AM

I have a question about using lead-ins in Lazycam.  I have watched all the videos and in it they show how to use lead-ins, however, on the video with the newest version there is no button to create a lead-in.  During the tutorial lead-ins are used but there is no mention of how to create them. My question is is there a shortcut key to do this or something else i'm missing?   I know the answer is probably very simple but i just cant figure it out.  Thanks

Title: Re: Lead-in Question
Post by: Herb on January 24, 2007, 08:50:53 AM

The option is in AutoClean Settings....Herb

Title: Re: Lead-in Question
Post by: Chip on January 25, 2007, 10:13:34 PM

Hi, Rkd

Click on the line you want the lead-in on, some-where on that line you'll see a Dot, Double click on it, Lead-in Con-fig. window will open up.

Check Lead-in ON, select options you'll need to work on it a bit, to figure out all the options.

Hope this Helps, Chip

Title: Re: Lead-in Question
Post by: rkd on January 26, 2007, 09:29:26 PM

Thanks for the help, i got i working now.