Machsupport Forum

Tangent Corner => Tangent Corner => Topic started by: budman68 on September 27, 2012, 03:37:26 PM

Title: m2.5 X 0.45 X 42mm long?
Post by: budman68 on September 27, 2012, 03:37:26 PM

Hi, guys,

Anyone have a source for this size machine screw?

It can be a pan head or fillister head, and it can be a phillips or slotted style. I'm looking everywhere but I can find anything longer than a 30mm. Even if it's longer than 42mm, I can cut them down and they can be any kind of plating but not black or brass.

Thanks so much for looking-
Dave

Title: Re: m2.5 X 0.45 X 42mm long?
Post by: Hood on September 28, 2012, 06:52:35 PM

They are in the UK but shouldnt cost too much to send I wouldnt think.

http://www.bolts-nuts-washers.com/Micro%20fasteners%20Slotted%20Cheese%20Head%20Machine%20Screws.htm

Title: Re: m2.5 X 0.45 X 42mm long?
Post by: budman68 on September 28, 2012, 07:00:33 PM

Quote from: Hood on September 28, 2012, 06:52:35 PM

They are in the UK but shouldnt cost too much to send I wouldnt think.

http://www.bolts-nuts-washers.com/Micro%20fasteners%20Slotted%20Cheese%20Head%20Machine%20Screws.htm

Thank you kindly, my friend! That is an excellent find and I appreciate your time very much as always.  :)

Dave

Title: Re: m2.5 X 0.45 X 42mm long?
Post by: Hood on September 28, 2012, 07:03:19 PM

No probs, had it bookmarked a while ago,  just had to find the bookmark in amongst the thousands I have ;d
Hood

Title: Re: m2.5 X 0.45 X 42mm long?
Post by: budman68 on September 28, 2012, 07:05:59 PM

 ;D