Machsupport Forum

Third party software and hardware support forums. => PoKeys => Topic started by: Holzwurm56 on September 17, 2012, 12:57:38 AM

Title: Location of xml File
Post by: Holzwurm56 on September 17, 2012, 12:57:38 AM

Hi,
I get a pokeys 56u and want to install the software . The pokeys.dll I have copy in the Mach3/plugin folder . What is the xml-file and where I must place the xml file ? .

Thanks

Hans

Title: Re: Location of xml File
Post by: NeoTO on September 17, 2012, 01:35:55 AM

Hi, Hans

Which xml file do you mean? If you have copied the PoKeys.dll in the Mach3/Plugins folder, follow the instructions in the manual (PoKeys Pulse Engine and Mach3 plugin manual - http://www.poscope.com/productattachments/index/download?id=77).
I would suggest you to also download the latest BETA version (3.0.39) of software and upgrade the firmware.

Title: Re: Location of xml File
Post by: Holzwurm56 on September 17, 2012, 02:20:11 AM

Hi ,
when I extract the pokeys plugin software there are 3 files the pokeys.dll , the pdf plugin manual and the kbd48CNC_SettingsNew.xml file .
What is the xml-file and where must be place ?

Thanks

Hans

Title: Re: Location of xml File
Post by: NeoTO on September 17, 2012, 02:27:07 AM

Do you have kbd48CNC keyboard connected to the PoKeys board? If you do, open the PoKeys plugin, go to import/export and import kbd48CNC settings from that file.
If you don't have kbd48CNC keyboard, then just delete this file.

Anyway, if you install the latest software, a new plugin is automatically installed in C:\Mach3\Plugins folder and you don't need to copy it manually. If you did copy it, install the software again to be sure you have the latest plugin.