Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Chip on January 16, 2007, 01:01:05 PM

Title: Ver. 037 Cut View and Tool Path Backwards with A Rot
Post by: Chip on January 16, 2007, 01:01:05 PM

Hi, Art, Brian and All

In the G-code below A axis view is backwards to actual cut path view when running.

Been this way for a while.

Settings Dia A set to 0.5

Thanks, Chip

Title: Re: Ver. 037 Cut View and Tool Path Backwards with A Rot
Post by: Chip on January 16, 2007, 02:43:04 PM

Hi, Art, Brian and All

Hear is the view, Cut should follow tooth line.

During feed hold it finds proper position, on restart position is sometimes off.

Thanks, Chip

Title: Re: Ver. 037 Cut View and Tool Path Backwards with A Rot
Post by: Chip on January 21, 2007, 12:36:16 AM

Hi, Art, Brian and All

WOW ! ! Ver .038, 4th Axis View Fix, what a nice job and watching it work WHOO-hooo !.

Thanks, Chip

Title: Re: Ver. 037 Cut View and Tool Path Backwards with A Rot
Post by: Brian Barker on January 21, 2007, 07:37:38 AM

See Even if we don't post we are still looking ;)