Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: vertigo on July 27, 2012, 12:43:57 PM
-
Guys, I just started a new home grown CNC operation running XP system and running (min) ram and lost all my keys..
I can't work it out. My first system worked fine untill I booted up the other PC and now both PC's are (DEMO) mode..WTF.
My other PC worked fine until now. I would like someone from supportMach to reply please. I as far as I know have done nothing wrong apart from forget bits and bytes and so on. Funny I was about to run the EXE to test drivers and (demo) showed up...Help Please
-
Not really sure what you are asking but if you have lost your licence do a search for Mach1Lic.dat. If you still cant find it send an email to license@machsupport.com with your details and Scott will likely send you a copy.
Hood
-
I've also had mine re emailed in the past. Like Hood says, just send an email.
-
thanks Hood..will do, I don't get it I just setup a new operating system and both have no Licence keys. I can't see a conflict but there must be one that I have overlooked. NB: one is XP and the other Windows7. it shouldn't have asked me for licence on system OS already running. Very confused, but many thanks Hood.
-
Still not sure what yopu are meaning.
Are you talking about the windows licence or Mach?
Hood
-
MACH3 licence
-
Mach wont ask you for a licence. If you have your licence place it in the Mach3 folder, if you have lost it email Scott.
Hood
-
I found the DAT file hood..now what do I do? MACH3 still says "Demo Version"
-
Place it in the Mach3 folder on your drive and then re-start Mach if it is already open.
Hood
-
yeah that worked..I put the file in the wrong location and MACH3 couldn't find it..Thanks Hood
-
no problem :)
Hood