Machsupport Forum

Mach Discussion => Mach3 under Vista => Topic started by: curator_ami on June 21, 2012, 08:38:55 AM

Title: unable to set debounce >9
Post by: curator_ami on June 21, 2012, 08:38:55 AM

hi,
 I'm having difficulty setting a debounce value greater than 9 in the general logic config window.
I'f i type any multi digit value into either of the two debounce setting boxes and apply the setting, when I return to the window the previous single digit value has been retained.

Has anyone else had this problem, what causes it, or know how to fix ?

I'm running windows 7.

thanks

Title: Re: unable to set debounce >9
Post by: curator_ami on June 21, 2012, 08:42:53 AM

funny, as soon ass I post a forum topic, it starts working.

its worth noting that the value must be entered in by the TAB key, not RETURN
(although I had previously realized this, and still I could not get greater than 9 into those two boxes... until now. weird :)

Title: Re: unable to set debounce >9
Post by: angel tech on June 21, 2012, 11:45:41 AM

you need to press ok at the bottom of the screen