Machsupport Forum
General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: microcnc05 on June 17, 2012, 10:11:08 PM
-
Since some of you have asked for the pinewood derby car I made in this youtube video: http://youtu.be/We1OgobWpSE
I thought I'd make a page on my site so others could have fun making it on their CNC machines.
The car is scaled to the maximum race standards so you shouldn't have to do any rework. Just make your setups and cut the file.
Download link: http://www.fendleyautomation.com/downloads.html
(http://www.fendleyautomation.com/wpimages/wp115e311a_06.png) If you have a Pinewood derby car you'd like to share, feel free to contact me though my site and I'll add it to our page with a link to yours. Have fun racing!
-
That's pretty cool. Very nice work on the video, too.
-
the open areas in the car does not allow the tool path to give you a very good look.
-
Since some of you have asked for the pinewood derby car I made in this youtube video: http://youtu.be/We1OgobWpSE
I thought I'd make a page on my site so others could have fun making it on their CNC machines.
The car is scaled to the maximum race standards so you shouldn't have to do any rework. Just make your setups and cut the file.
Download link: http://www.fendleyautomation.com/downloads.html
(http://www.fendleyautomation.com/wpimages/wp115e311a_06.png) If you have a Pinewood derby car you'd like to share, feel free to contact me though my site and I'll add it to our page with a link to yours. Have fun racing!
Any chance of getting a copy in stl format?
John