Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: bob63 on June 16, 2012, 06:51:49 PM

Title: settings
Post by: bob63 on June 16, 2012, 06:51:49 PM

i have just bought a desktop 3020 from ebay the settings they gave me seam to be wrong dose anyone no what the settings should be for using mac3

Title: Re: settings
Post by: RICH on June 17, 2012, 08:18:11 AM

Mach requires you to configure the program for your system. All in the manual.
RICH