Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: spr203 on June 12, 2012, 03:02:30 PM

Title: can not edit g-code in mach3
Post by: spr203 on June 12, 2012, 03:02:30 PM

hi, hope i am posting in the correct spot .

i am using cambam to write programs from dxf . it all work good for what i am using it for . the problem i have ran into is that after loading the cambam file into mach3 i can not edit the gcode from the mach3 screen . any help would be great . thanks

Title: Re: can not edit g-code in mach3
Post by: ger21 on June 12, 2012, 05:57:08 PM

Do you have an editor assigned in General Config?