Machsupport Forum

Third party software and hardware support forums. => PoKeys => Topic started by: tantan on June 02, 2012, 04:09:16 AM

Title: pokeys 56 + poextbusre
Post by: tantan on June 02, 2012, 04:09:16 AM

hi, does somebody has an example how to switch on/of relays on the poextbusre board with mach3

i use the latest mach, pokeys and plugin software

Title: Re: pokeys 56 + poextbusre
Post by: NeoTO on June 03, 2012, 11:02:12 AM

How do you want to control these outputs?

You can open the device configuration in the PoKeys plugin dialog and assign a
* 'OEM LED' to PoExtBus mapping (controlling the outputs with various signals in Mach3)
* Mach3 standard input/output to PoExtBus mapping (controlling the outputs with various signals in Mach3 or G-code commands)
* Mach3 IO device to PoExtBus mapping (controlling the outputs with VB script)

Title: Re: pokeys 56 + poextbusre
Post by: tantan on June 03, 2012, 11:12:18 AM

hi, thanks for you reply,

is it possible to become an example for each option. i cannot get this from the user manual of the pokeys or relayboard.

tnx

tantan

Title: Re: pokeys 56 + poextbusre
Post by: NeoTO on June 03, 2012, 11:20:56 AM

Please take a look at the Pulse engine and Mach3 plugin manual, available at http://www.poscope.com/productattachments/index/download?id=77

Title: Re: pokeys 56 + poextbusre
Post by: tantan on June 03, 2012, 01:04:47 PM

oke tnx,

i think i know what to do. i give it a try.

tnx again

tantan

Title: Re: pokeys 56 + poextbusre
Post by: tantan on June 06, 2012, 02:52:51 PM

it works great!

it's amazing how many features this little device has!

tnx

tantan