Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: ilkleyal on May 15, 2012, 03:54:02 AM

Title: Cambam question
Post by: ilkleyal on May 15, 2012, 03:54:02 AM

Hi

Question, when I draw a shape in Cambam using polyline, How do I determine its size? The tutorial video covers everything  to do with creating and machining it but not how big it is.

Are the grid lines 1mm? if so, what if I wanted to draw something that was 50.5 between 2 points for example?

Hope you can assist

Thanks

Al

Title: Re: Cambam question
Post by: ilkleyal on May 15, 2012, 05:42:39 AM

Hi, patly answered my own question, yes, its 1mm grid lines. Can I change the resolution or is there another method to set a dimension between squares?
Cheers Y'all

Al

Title: Re: Cambam question
Post by: RICH on May 15, 2012, 06:15:42 AM

Don't use CamBam's CAD so can't be of much help other than to say if you don't get a response here that you go to the CamBam site
have a look at the videos, manuals, etc and maybe register for the forum and ask there.
RICH

Title: Re: Cambam question
Post by: Graham Waterworth on May 18, 2012, 08:04:08 AM

Select the item in the menu tree and click on its properties, there will be a list with height, width etc, just enter new values and press enter.

Title: Re: Cambam question
Post by: nzinoz on May 21, 2012, 04:51:44 AM

Hi you can also use points > collection ....  click on ....  brings up the table  which can be edited