Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: mads husted on April 06, 2012, 09:43:05 AM
-
Hello I like to get a cnc to make PCB. I found this on ebay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180735260345&ssPageName=ADME:X:AAQ:US:1123 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180735260345&ssPageName=ADME:X:AAQ:US:1123)
So do any know that LazyCam will work whis cnc or do I need another controller?
//mads
-
Hi Mads,
The machine supplier says it runs from GCode and LazyCam outputs GCode so there should be no problem using this machine with Mach3 for routing PCB's.
Tweakie.
-
Okay thanks for you´re reply
-
Hi Mads,
There are quite a few free PCB routing programs about and this may be of interest to you http://www.pcbgcode.org/
Tweakie.
-
Okay thanks