Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Triblix on April 03, 2012, 06:06:45 PM

Title: Mach3 OPC server for SCADA application
Post by: Triblix on April 03, 2012, 06:06:45 PM

Good evening,

Does anyone know which OPC server I can use to connect to Mach3?

I tried to connect Mach3 to my SCADA solution through the Modbus Serial RTU (Connecting 2 PC's with a null modem) and Mach Brains, but was unsuccessful.
I am using Movicon11.3 software to create the SCADA solution.

Thank you in advance for the assistance.

Regards,
Tremaine

Title: Re: Mach3 OPC server for SCADA application
Post by: bmwilson55 on June 14, 2017, 07:57:42 AM

Were you able to find a solution for this? Thank you.