Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: dcs on January 03, 2007, 02:34:15 PM

Title: OEMCode 84
Post by: dcs on January 03, 2007, 02:34:15 PM

Hi

I'm putting toghether a simple screen and I have a Jog on/off button, which does work.  I also have an LED which is tied to OEMCode 84, so it should go on/off with Jog mode, but it doesn't.  Its always off regardless of jog on/off mode.  Am I overlooking something or what??

I can post a copy of the screen when I get it done.

Title: Re: OEMCode 84
Post by: Scott on January 03, 2007, 04:58:18 PM

Hi,

Try 103 for the button and 83 for the led. 84 is the CV feed enabled led.

Check the Mach Wiki for the lists of buttons, leds, etc.  ;)

Regards,

Title: Re: OEMCode 84
Post by: dcs on January 03, 2007, 06:34:02 PM

Yep that did it!  ;D     I was using the list of OEM codes from a mach2 manual.