Machsupport Forum

Third party software and hardware support forums. => Third party software and hardware support forums. => Topic started by: spr203 on February 22, 2012, 09:19:58 PM

Title: centriod cnc4 with stepper motors can i use anything from this and add mach3
Post by: spr203 on February 22, 2012, 09:19:58 PM

hi, i have a centriod cnc4 with stepper motors it is from 1992 belive it or not it ran fine up to last mounth the pc that came with it is dead . the software that runs the cnc4 unit is rs232 and faunuc code . so the problem is it will not run with windows . so what i'm looking for is help running this with mach3 and keep my stepper motors . any help would be great . thanks