Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Pader on February 07, 2012, 11:36:46 AM

Title: Machine type for Mach3
Post by: Pader on February 07, 2012, 11:36:46 AM

Hi folks,

I would appreciate some help.  I am installing CAM software and it requires to know which type of machine I will be using (FANUC, etc.).  What type of machine is Mach3?

Title: Re: Machine type for Mach3
Post by: RICH on February 07, 2012, 03:35:58 PM

I am guessing that the cam will select a post processor based on the machine you have. If Mach3 is not listed then Fanuc may work well.

RICH

Title: Re: Machine type for Mach3
Post by: Pader on February 07, 2012, 05:20:15 PM

Thank you very much for your time