Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Tony Woollacott on January 19, 2012, 09:58:14 AM

Title: Wire EDM and Mach 3
Post by: Tony Woollacott on January 19, 2012, 09:58:14 AM

Does anyone know if it is possible to use Mach 3 as a wire EDM controller?

Title: Re: Wire EDM and Mach 3
Post by: Tony Woollacott on January 30, 2012, 03:03:54 AM

I will take that as a NO then.