Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: whitey on January 13, 2012, 07:31:55 PM

Title: 2 Axis and Mach 3
Post by: whitey on January 13, 2012, 07:31:55 PM

 This may be a dumb question but new to this.
 Will Mach 3 work with a 2 Axis only mill without any problems. Thanks Whitey

Title: Re: 2 Axis and Mach 3
Post by: Tweakie.CNC on January 14, 2012, 04:14:00 AM

Hi Whitey,

Yes it will.

I use Mach3 with a laser which is really just 2 axis of operation.

Tweakie.

Title: Re: 2 Axis and Mach 3
Post by: whitey on January 14, 2012, 10:25:00 AM

Thanks. Whitey