Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: D-M on January 07, 2012, 08:48:38 PM
-
Hi all
I make a part in cambam and take it to the machine and it reverses my Z travel? Z is down -Z is up
Any help?
Thanks Dave
-
How does your machine currently move? Z+ should be the tool moves away from the bed.
(;-) TP
-
If I use the jog console the buttons are backwards and now i'm so tired I'm not sure the X&Y are correct but -x moves to the left and -Y moves to the column or away from the operator standing in front of the machine .
Thanks Dave
-
Z+ moves the tool away from the bed , X+ moves to the operators right and Y+ moves away from the operator with the operator standing in front of the machine.
(;-) TP
-
OK as I thought so any one have an ideal why mine is backwards ?
LOL got to love this learning curve
Dave
-
Ok i must need some sleep just took a few minutes in the hot tub and reread my post.
So my X travel is correct -X moves to the left and +X moves to the right.
Y is not correct my Y + moves to the operator standing in front or the machine.
and Z is also backward with -Z is up + Z down
Dave
-
Dave, go to Config > Homing/Limits and click the ‘Reversed’ button.
Al
-
thanks Al
that's what i was looking for I knew there had to be a way Ill fix it in the am
Dave