Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: dinko on September 26, 2011, 10:23:26 AM

Title: Witch Postprocesor
Post by: dinko on September 26, 2011, 10:23:26 AM

Hello i m very new at CNC maching and i have one "problem" with generate G-code

i gave a normal 3 axis CNC machine and i work with some Cad programs and ArtCAM program to generat G-cod for my machine:

so i wint to Z rough with 20mm  tool an then i want to finish wit 3mm tool... and when i want to generate G-code (G-code (mm) (*.tap)) i got warning that i dont have postprocessor that alow me to change tool... what can i do ??


p.s. sorry about my language.. it's not my mother language


tnx

Title: Re: Witch Postprocesor
Post by: ostie01 on September 29, 2011, 02:44:28 PM

You have to go to the post processor list and choose one that allow tool chance.

Choose it before posting the code with Artcam.

Jeff