Machsupport Forum

Mach Discussion => Mach Screens => Machscreen Screen Designer => Topic started by: stevehuck on August 25, 2011, 01:38:39 PM

Title: Reset button help
Post by: stevehuck on August 25, 2011, 01:38:39 PM

I have created a wizard to aid myself in some basic day to day stuff. I needed a reset button so i inserted a button and LED. I have the button working ok but the LED, not so much. I have tried every led that would seem to work with the reset button but no light and no flash. What LED should I use to monitor the reset button and flash when the button needs to be reset?

Thanks in advance.
Title: Re: Reset button help
Post by: budman68 on August 25, 2011, 02:26:00 PM
Here's what the LED dialog box should look like in Screen 4:

Hope that helps,
Dave
Title: Re: Reset button help
Post by: stevehuck on August 25, 2011, 05:03:40 PM
Thanks Bud but I use machscreen.
Title: Re: Reset button help
Post by: budman68 on August 25, 2011, 05:22:55 PM
Ok, then does this help?

Dave
Title: Re: Reset button help
Post by: stevehuck on August 25, 2011, 06:22:02 PM
Maybe

I tried to enter the data from your screen shot and the program crashed. Now I can see the led on the screen but i cant select it when I click on it. I'll give it a go if i can figure out whats going on.


Thanks!!
Title: Re: Reset button help
Post by: stevehuck on August 25, 2011, 06:43:42 PM
That worked like a charm. I think when I set it "Global" it moved the led to page zero so I couldn't click on it. All is working good now!!  Thanks.
Title: Re: Reset button help
Post by: budman68 on August 25, 2011, 06:50:55 PM
Glad to be of help, Steve-

Dave