Machsupport Forum

Mach Discussion => Mach Screens => Machscreen Screen Designer => Topic started by: krsykes23 on July 27, 2011, 08:57:28 AM

Title: Border properties
Post by: krsykes23 on July 27, 2011, 08:57:28 AM

As a relative newcomer to Mach3, I was wondering if the raised border around the G-Code window and Toolpath, and the
inset border around the DRO's could be removed.  In other words, I require just a plain border (or preferably, no boarder at all)
Is this possible?

Title: Re: Border properties
Post by: Klaus1311 on July 27, 2011, 04:24:20 PM

Hi


try to uncheck "Boxed DRO's and Graphics" in Config -> General Config.. in Mach3.
Don't forget to reload the set-file after changing the checkbox


Klaus

Title: Re: Border properties
Post by: krsykes23 on July 27, 2011, 04:49:55 PM

Thanks Klaus.  Perfect!

Keith