Machsupport Forum

Mach Discussion => Mach3 under Vista => Topic started by: tchristian on July 10, 2011, 02:54:50 AM

Title: Installed Mach 3 on a Windows7-32bit PC, but DriverTest doesn't work.
Post by: tchristian on July 10, 2011, 02:54:50 AM

Hi,
    I'm wondering if someone can help me troubleshoot this.
I installed Mach3 on a Windows7-32 bit machine carefully
following the instructions to reboot after the install and before
running Mach3.  However, when I attempt to launch the DriverTest
program nothing happens. DriverTest doesn't seem to run at all.

I don't know what to do now.

Title: Re: Installed Mach 3 on a Windows7-32bit PC, but DriverTest doesn't work.
Post by: andrewm on July 11, 2011, 09:01:48 AM

Did you set the driver test to "Run as Administrator"?

Title: Re: Installed Mach 3 on a Windows7-32bit PC, but DriverTest doesn't work.
Post by: tchristian on July 15, 2011, 04:01:15 AM

Thanks. No.
That was the problem.

Scott at ArtSoft asked the same thing.
When I rightclicked on the icon for DriverTest and selected "Run as Administrator",
it ran just fine.

So problem solved.