Machsupport Forum

General CNC Chat => Share Your GCode => Topic started by: hornby chopper on July 01, 2011, 09:50:30 PM

Title: tub bending dies
Post by: hornby chopper on July 01, 2011, 09:50:30 PM

Hi every one lots of great info here
my question is  dose anyone have gcode files for  doing one pc or split tube bending dies and doing this on a mill without 4th axis

i know i sean some where in mach to dow mirror of parts this would help on the 2 pc dies

what dose every one think

Title: Re: tub bending dies
Post by: RickyLee53 on November 08, 2011, 06:50:06 PM

I'd also be interested in this.