Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: moadib64 on May 31, 2011, 12:07:09 AM

Title: camworks post processor
Post by: moadib64 on May 31, 2011, 12:07:09 AM

I have searched the forum and it doesn't look like anyone is using camworks.
we are using solidworks 2011 with camworks 2011 and a Mikini 1610L mill running Mach 3.
Does anyone have a post that works?
Our VAR has so far been unable to get us something that works.

I've had the most problems anytime a g41 is output. Everything steps through fine, but Mach will run completely erratic with some moves even going backwards.

Any help is appreciated.

Title: Re: camworks post processor
Post by: BR549 on May 31, 2011, 10:12:01 AM

Any of the early Fanuc posts should get you started. Camworks should be able to provide you with a proper post.

(;-) TP