Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: LowryIndustries on May 27, 2011, 01:06:20 PM
-
I have posted more Bridgeport Manuals and CNC conversion information.
Go to WWW.LOWRYINDUSTRIES.COM and scroll to the bottom of the page.
Click on the link BridgeportManuals. Here is what you will see.
"Bridgeport Manuals
A gift to the Bridgeport Community.
This document outlines how to convert a Bridgeport CNC with Boss controller to Mach3.
How to convert a Bridgeport Boss 6 to Mach 3.pdf
There is also an important accompanying Video.
http://www.youtube.com/watch?v=lD8-iQ83oZY
I have also scanned and posted the following manuals.
In my experience, most if not all of these manuals are virtually impossible to obtain till now.
The manuals are either jpg pages or PDF files collected into ONE ZIP FILE TO DOWNLOAD FOR EACH MANUAL.
R2E4 CNC
EZ-FILE
Bridgeport Series I CNC Program Entries Descriptions
Series II CNC Programming Manual
Series I Programming Manual
Series II CNC Operating Manual
Series II CNC Maintenance Manual
NC-Programming-Sheet
Bridgeport-BOSS-G-Codes
SERIES-1-CNC-PROGRAMING-MANUAL-Untitled
Student Manual.
Many who own ANY Bridgeport CNC will be specially interested in the maintenance manual. It has
all the schematics for both the electronic and mechanical components plus tuneup, repair, and
overhaul details. Although it covers the Series II CNC, much of the information applies to ALL Bridgeport CNC vertical mills.
The programming manuals are excellent resources for programming CNC mills irregardless of
whether you are running a BOSS controller or Mach 3.
Free of charge. All I ask is to only download what you need so I do not run out of bandwidth."
-
Thanks for that, I am sure they will be a great help, I have downloaded the maintenance manual, dont have a series 2 but you never know whats ahead :)
Hood
-
I'm sure glad I could offer something back! You guys have always been the best.