Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Craig1 on May 13, 2011, 11:29:41 PM

Title: First G code to actual part
Post by: Craig1 on May 13, 2011, 11:29:41 PM

So things went pretty well. I still have plenty to learn. This was a good start though. The part was orientated in mach facing the other direction so I need to flip the axis. Also locating the block better would help. Eye balling isn't so accurate. 

Title: Re: First G code to actual part
Post by: Tweakie.CNC on May 16, 2011, 11:52:29 AM

Looks like you are off to a good start Craig.  ;)
Keep posting the pictures and experiences.

Tweakie.