Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: anthony.zulli on April 24, 2011, 02:02:27 AM

Title: PCI sun 4018T ver 3.2 not working
Post by: anthony.zulli on April 24, 2011, 02:02:27 AM

Hi, I am sure someone can help as I have no where else to look !!!!

I have a sun1888 chip on a 4018T parallel port.  The I/O is OxDF00 and OxDD00 but its not working when I use this on Mach3. 

What can I do to get me CNC working??

 

Title: Re: PCI sun 4018T ver 3.2 not working
Post by: asw on June 25, 2011, 04:11:35 PM

howdy, did you find the address in device manager or just took it from the manual?
Mine had 3 different address ranges.(found in device manager) the first address did not work but the second went just fine.
Have fun, and tell us if it works now.

Title: Re: PCI sun 4018T ver 3.2 not working
Post by: anthony.zulli on June 25, 2011, 07:43:56 PM

Hi asw - it was in device manager - I have now replaced it with a different brand and its fine now :-)
AZ

Title: Re: PCI sun 4018T ver 3.2 not working
Post by: asw on June 26, 2011, 09:58:49 AM

Glad to hear that everything is OK now.