Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: JungleStreetRecords on March 27, 2011, 01:40:06 AM

Title: Mach3 CNC Lathe
Post by: JungleStreetRecords on March 27, 2011, 01:40:06 AM

Alrighty, my motor controller isn't working with cnc mill, turning or plasma but works fine with Qbasic from the 1980's.

Title: Re: Mach3 CNC Lathe
Post by: RICH on March 27, 2011, 07:24:09 AM

Provide a schematic and manual for the drives of  your controller.
Some old controllers have drives that take commands from an interface program and will
not  or may not work with a modern controlling program.

RICH