Machsupport Forum

Mach Discussion => FAQs => Topic started by: jd1uth on March 20, 2011, 06:24:20 PM

Title: Breakout board
Post by: jd1uth on March 20, 2011, 06:24:20 PM

Hello All
I Do Need a breakout board there are so manny i do not now what ik must get i ask jou for advice on this what is the best choice
i whant a good board for 4 drives, limit and  home connectors.

jan

Title: Re: Breakout board
Post by: ostie01 on March 20, 2011, 09:46:44 PM

I would choose one with which you can select if pins 2 to 9 can be either inputs or outputs.

This leave you with more choice with the breakout board.

CNC4PC make good ones.

The C10 and C11 are very popular with Mach3 users.

I wanted to buy the C32 model but it is back order.

Also buy one that is fully opto isolated or one fully isolated (others method) to protect your computer

Jeff

Title: Re: Breakout board
Post by: Tweakie.CNC on March 21, 2011, 03:43:10 AM

Hi Jan,

The CNC4PC, C10 and C11 seem to have become the industry standard with good price and good quality as well as good back-up if you ever need it.

Tweakie.

Title: Re: Breakout board
Post by: jd1uth on March 23, 2011, 05:20:01 PM

Thank for the replay i think i go for the C11 

Title: Re: Breakout board
Post by: Tweakie.CNC on March 24, 2011, 03:05:14 AM

That would be my first choice as well.  ;)

Tweakie.

Title: Re: Breakout board
Post by: jd1uth on March 27, 2011, 04:54:23 PM

Are there any more options for a good breakout board.
bad manual for such a good looking card.
i read a lot of troble hook up the wirering  becourse of the bat manual.

Jan