Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: compositepro on November 22, 2006, 04:22:46 PM
Title:
edgecam post
Post by:
compositepro
on
November 22, 2006, 04:22:46 PM
has anyone mastered this or do i have to start from scratch
Title:
Re: edgecam post
Post by:
Graham Waterworth
on
November 23, 2006, 02:59:04 AM
A Fanuc 6 or 11 post will work.
Graham.