Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: sinkyster on March 17, 2011, 05:23:12 AM

Title: First pierce delay Longer than the rest
Post by: sinkyster on March 17, 2011, 05:23:12 AM

Hi all,

I have a cnc plasma cutter and I am using Sheetcam TNG and Mach3. With the first pierce of every operation, the pierce delay is a bit longer than all the rest. I have 4 holes to cut. Pierce delay on the tool (same on all 4 holes) is 0 seconds. But when starting to cut the first pierce have a delay of ± 1 second. The other 3 holes will be 'normal' as specified by the tool...

Any ideas?

Sinkyster