Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: mongkol on March 10, 2011, 03:01:48 AM

Title: How to see DRO A-axis on mach screen ?
Post by: mongkol on March 10, 2011, 03:01:48 AM

 Dear Sir,
  I need the help.  I can see  DRO's of X,Y and Z-axis on mach screen by now.
 I want to use the A-axis and need it to show DRO's of A-axis on mach screen. How to set up ?

 Hope your help
  Mongkol

Title: Re: How to see DRO A-axis on mach screen ?
Post by: Tweakie.CNC on March 10, 2011, 03:09:20 AM

Don't know if this helps but the A Axis DRO is shown as Axis 4 on my screen.

Tweakie.

Title: Re: How to see DRO A-axis on mach screen ?
Post by: mongkol on March 10, 2011, 03:13:57 AM

Tweakie,
 Thanks for the reply.
If I need A,B and C axis as well. Total 6 axis. ( X,Y,Z,A,B and C .)
How to set up to show DRO's all axis on mach screen ?

Pls help
Mongkol

Title: Re: How to see DRO A-axis on mach screen ?
Post by: Tweakie.CNC on March 10, 2011, 03:24:58 AM

There is a 6 axis screen .set  which may be suitable for your needs under the downloads section http://www.machsupport.com/screens.php

Failing that, you could design / build your own screen .set - the tools are available here, it is not too difficult.  :-\

Tweakie.