Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: steppmjk on February 26, 2011, 09:36:44 AM

Title: go to zero jog rate
Post by: steppmjk on February 26, 2011, 09:36:44 AM

I've set my motor tuning velocities to the max that I can move without skipping.When I click the goto zero button,all axis' go above my set velocities causing them to skip.
How do I set the max velocity for the goto zero button?

Title: Re: go to zero jog rate
Post by: ger21 on February 26, 2011, 09:39:53 AM

The blended velocity is higher, but the individual axis can not exceed the motor tuning velocities.

Does it do the same thing if you use MDI and do a
G0 X0 Y0 Z0
?

Title: Re: go to zero jog rate
Post by: steppmjk on February 26, 2011, 09:46:03 AM

Not sure what you mean I'm new at this. I have noticed that the speed will go higher than my max if I dont slow the speed per minute rates in the cam program