Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: tregs on February 08, 2011, 08:02:32 PM

Title: partial loading of Gcode to mach3 problem
Post by: tregs on February 08, 2011, 08:02:32 PM

I am having an odd issue.  Mach3 is only loading part of my Gcode.
I have an old pc with xp, 1.7 ghz and it had 500 mg of ram, but i just upped it to 1gig of ram to see if it would help...nope.
It now meets basic specs for mach3... and it was running...but something is wrong.
I don't know why it would only load part of the code but the tooling path is incomplete and just stops part way in.
I tried reinstalling Mach3 after the memory upgrade, to no effect.
I've tested the Gcode on another machine with mach 3 and it has more code than loads on the machine in question.

Thoughts?  Other than get a better PC.
Perhaps some setting I don't know about?

Title: Re: partial loading of Gcode to mach3 problem
Post by: tregs on February 08, 2011, 08:21:47 PM

demo version-   ooops loaded wrong exe.

nevermind.....