Machsupport Forum

Third party software and hardware support forums. => Galil => Topic started by: Shivu on December 26, 2010, 10:40:47 PM

Title: Remot Pendent for Galil
Post by: Shivu on December 26, 2010, 10:40:47 PM

I need to use remote push buttons for galil for the operators convenience like start, stop, spindle on, can any one guide me how to do this with Mach3 and Galil. 

Title: Re: Remot Pendent for Galil
Post by: smurph on December 26, 2010, 11:01:39 PM

In general, you would wire these buttons to an input.  And then you would use a Brain to take the appropriate action.  Have a look at the tutorials here: http://www.machsupport.com/videos/ (http://www.machsupport.com/videos/)

Steve

Title: Re: Remot Pendent for Galil
Post by: Shivu on December 28, 2010, 02:18:24 AM

Hi Steve,

Thank you very much for your information, i am able to set up the remote pendent after checking up the videos.

Shivu