Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: reednoel4u on December 06, 2010, 03:47:13 AM

Title: Newbie to CNC, please help
Post by: reednoel4u on December 06, 2010, 03:47:13 AM

Im a newbie, please help...
I drawing the charcter L and P in the Corel Draw and Export to Card with exp is : .DXF
when I using the LCam the pictuter very good :
(http://me.zing.vn/apps/photo?params=/0o000000/album/photo-detail/id/1140974476)
but convert to the Mach3, the P no good :
(http://me.zing.vn/apps/photo?params=/0o000000/album/photo-detail/id/1140974477)
please show me how to do fix it

Title: Re: Newbie to CNC, please help
Post by: reednoel4u on December 06, 2010, 04:06:51 AM

sorry the link is fail :
http://me.zing.vn/apps/photo?params=/0o000000/album/photo-detail/id/1140974476 (http://me.zing.vn/apps/photo?params=/0o000000/album/photo-detail/id/1140974476)
http://me.zing.vn/apps/photo?params=/0o000000/album/photo-detail/id/1140974477 (http://me.zing.vn/apps/photo?params=/0o000000/album/photo-detail/id/1140974477)

Title: Re: Newbie to CNC, please help
Post by: Graham Waterworth on December 06, 2010, 09:57:29 AM

Are you using a licensed version of Mach3?

Turn of splines in corel draw.

Graham
 

Title: Re: Newbie to CNC, please help
Post by: reednoel4u on December 07, 2010, 03:18:14 AM

Thanks for your respond.
I just begin lean CNC, so using the demo of March3

Title: Re: Newbie to CNC, please help
Post by: reednoel4u on December 07, 2010, 05:47:59 AM

I looking for splines but don't know, please show me How to do Off it, Thank a lot

Title: Re: Newbie to CNC, please help
Post by: Graham Waterworth on December 07, 2010, 10:29:27 AM

You need to turn off splines in the Corel draw options within the DXF output.

The demo version of lazycam had a g-code limit of 50 lines and mach3 a limit of 500 lines.

Graham

Title: Re: Newbie to CNC, please help
Post by: reednoel4u on December 07, 2010, 11:38:34 AM

Hix, I don't know splines, what splines and where 's it.
Whom know please me, Thx

Title: Re: Newbie to CNC, please help
Post by: cnc_freshmen on December 10, 2010, 04:09:20 PM

hi to all guys out there i am new about cnc and i just finish my own cnc plasma table. i try to load a gcode that convert
from sheetcam and i fund out the size of my drawing is 10x bigger than the drawing. please help me, i don't know
where i got wrong and also i can't see the on/off of plasma

thanks

Title: Re: Newbie to CNC, please help
Post by: reednoel4u on December 15, 2010, 11:24:24 AM

Quote from: reednoel4u on December 07, 2010, 11:38:34 AM

Hix, I don't know splines, what splines and where 's it.
Whom know please me, Thx

Whom know help me ...................