Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: gdanielhoracio on December 05, 2010, 06:54:14 AM

Title: exact stop vs cv mode
Post by: gdanielhoracio on December 05, 2010, 06:54:14 AM

Hi, I'm new in the forum and I new in the cnc to, I have a bridgeport cnc serie 1 boss w/ mach 3 and I'm learning how to use. yesterday when I star the machine i saw in abnormal condition in yellow, exact stop vs cv mode and I d'ont know how to fix that, I need help thanks.

Title: Re: exact stop vs cv mode
Post by: RICH on December 05, 2010, 07:13:34 AM

Check your config and will you will see that that exact stop is checked. It is just alerting you that you you have a choice. Double click the button and answer yes or no as to
the mode you want. The button will then turn green.
RICH

Title: Re: exact stop vs cv mode
Post by: gdanielhoracio on December 05, 2010, 11:45:55 AM

thanks Rich for answer=2C in what part the confi I have to go to find the e=xact stop=2C because I saw in general configuration and i c'ant found anyth=ing. thank you again Rich.

Title: Re: exact stop vs cv mode
Post by: RICH on December 05, 2010, 06:22:57 PM

see pic
RICH

Title: Re: exact stop vs cv mode
Post by: gdanielhoracio on December 06, 2010, 07:40:03 PM

Hi rich I can fixed the problem thank you very much master ;)