Machsupport Forum

Mach Discussion => Mach Screens => Screen designer tips and tutorials => Topic started by: rouckie on November 29, 2010, 06:47:50 AM

Title: number of digits behind . in dro
Post by: rouckie on November 29, 2010, 06:47:50 AM

I'm fairly new to mach 3.

I work in mm's and the dro's have an "accuracy" of 4 digits behind the .   ( for example 5.9997 mm)

can I change this to only have 3 digits behind the .  so I get 6.000 mm?

thanks,

Roel

Title: Re: number of digits behind . in dro
Post by: Overloaded on November 29, 2010, 07:04:58 AM

Sure ... Open the screen set with Screen4, double click on the DRO, then change the 4 in the string to 3.
Mach will still work to 12 - 13 decimal places internally.
Russ