Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: MillingGuy on November 14, 2010, 06:19:10 AM
-
Hi,
is there a way to record movements done by arrow-keys (x-, y- and z-axis) and translate them into G-Code.
Doing teachin via MDI is a hard to do, if lot of little steps have to be done.
Thanks, MillingGuy
-
Have a look at the JCode plugin, it may be what you are wanting.
Hood
-
Have a look at the JCode plugin ...
Thanks. I'm already looking at it.
Regards, MillinGuy