Machsupport Forum

General CNC Chat => Share Your GCode => Topic started by: tgeist on November 08, 2010, 09:03:53 AM

Title: Post for Mach3
Post by: tgeist on November 08, 2010, 09:03:53 AM

I', looking for the post to run my Master Cam MR2 (10.2.2.31) also says Ver. 0.17.1.167. I would like to do my drawning in my autocad and run through my Master Cam which I use in my shop. Any help would be good.

Title: Re: Post for Mach3
Post by: RICH on December 04, 2010, 07:13:05 AM

Quote

May I express my master no information offline.

Don't understand the reply....sort of like a cypher. ???
RICH

Title: Re: Post for Mach3
Post by: DaOne on December 04, 2010, 04:03:18 PM

What version of Mastercam? X - X5, lathe or mill post? MR2 doesn't tell me much. Thats just the maintenance release.  I have been working on a lathe post for X5

Title: Re: Post for Mach3
Post by: G_ANZO on March 28, 2012, 02:49:41 PM

i used mastercam 14 and i need to know what post to use because tha mpfan make tha machine loca loca

Title: Re: Post for Mach3
Post by: RICH on March 28, 2012, 05:42:16 PM

Quote

because tha mpfan

Don't understand.. ???

RICH

Title: Re: Post for Mach3
Post by: DaOne on March 28, 2012, 06:00:13 PM

Mpfan is a generic post for Mastercam.  If you purchased Mastercam you should have no problem getting a post from your dealer.

Title: Re: Post for Mach3
Post by: G_ANZO on March 31, 2012, 08:53:51 AM

ok but my Q WAS which post I need to ask for

Title: Re: Post for Mach3
Post by: BR549 on March 31, 2012, 11:23:39 AM

Well just guessing here BUT if you are using MACH3 I would ASK for a post for MACH3.

Just a thought, (;-) TP

Title: Re: Post for Mach3
Post by: ostie01 on April 01, 2012, 05:28:19 PM

I think a regular FANUC post would work.(already in mastercam)

Will probably have to make some changes in the header file but the code will work.


Jeff