Machsupport Forum

General CNC Chat => Share Your GCode => Topic started by: castleworks on October 11, 2010, 06:29:54 PM

Title: Looking for Ferrari Emblem G code or DXF file
Post by: castleworks on October 11, 2010, 06:29:54 PM

Hi All,

I am looking for either a DXF file or G code of the Ferrari prancing horse logo.

Any other super cars would be great too....Lamborghini, Porsche etc

Thanks!

Castle Works

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: TramAlot on October 11, 2010, 07:10:01 PM

do you have meshCAM and somthing like CorelDraw. graphic to gecode is not very hard with those two.

this may help too

http://www.logotypes.ru/list_e.asp?cat=A

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: ardsranger on October 13, 2010, 11:54:36 AM

do you want it as a 3d stl file or as a "line art" file

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: tjstamp on January 21, 2011, 05:23:54 PM

i tried to download the logo site but cant. even after i unzipped it it wont open. little help please.

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: Ya-Nvr-No on January 21, 2011, 07:54:28 PM

here is a outlined DXF vector file I created for you.  :)

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: RICH on January 21, 2011, 08:00:31 PM

The dxf dosn't work when tried with a few programs on this end.
RICH

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: budman68 on January 21, 2011, 08:18:04 PM

Ya-Nvr-No's file works perfectly here using VCarve Pro.

Dave

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: Ya-Nvr-No on January 21, 2011, 09:10:35 PM

that was saved as a generic dxf format
here is an acad format & an eps file
something will work for you,  ;)

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: Ya-Nvr-No on January 21, 2011, 09:43:27 PM

here is the Porsche and Lambroghini files

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: CNCSTEVE on March 03, 2011, 07:06:42 AM

Hi Everyone
I have attached a cnc program file ( G Code) for anyone who wants it
of the dxf file :)
Datum bottom left hand side dimensions 27mm wide 34mm high

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: Tweakie.CNC on March 03, 2011, 07:55:22 AM

Nice one Steve, thank you.

Tweakie.

btw. Welcome to the forum

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: CNCSTEVE on March 04, 2011, 09:48:26 AM

NC program for lambo dxf
275mm x 117mm
Datum bottom left
Anyone got anything they want programmed  ;D

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: Sam on March 04, 2011, 01:02:22 PM

Not sure what a "G187 E.07" is, but it needs to be removed to work. Also the nested comment needs to be removed. Other than that, it works as expected.

Title: Re: Looking for Ferrari Emblem G code or DXF file
Post by: CNCSTEVE on March 04, 2011, 07:26:19 PM

Sorry about the G187 this code is used on Haas CNC Machines
Here are the G Code files for the lambo and Porsche :)
As with my other programs the datum position is in the bottom left hand corner