Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: vadude on October 05, 2010, 09:22:05 PM

Title: Cutting layers at different depths
Post by: vadude on October 05, 2010, 09:22:05 PM

I have an unregistered LC but for some reason cannot cut diff't layers at diff't depths.What am I doing wrong here?

Title: Re: Cutting layers at different depths
Post by: RICH on October 06, 2010, 12:20:29 PM

vadude,
You need to select the layer which represents what you want to machine, and then, for that machining task define the
tool and cut depths in the layers tab which located on the bottom of the screen. All in the manual....do tutorial #1

RICH