Machsupport Forum

Third party software and hardware support forums. => Galil => Topic started by: Cncman2nv on September 22, 2010, 11:51:22 AM

Title: MPG Not Stopping At Soft Limits
Post by: Cncman2nv on September 22, 2010, 11:51:22 AM

I have a single MPG wheel hooked to a dcm2100 card threw the ICM module and when moving the table or Z axis they go right past the soft limits and hard limits I'm looking for any idea why this is happening

Title: Re: MPG Not Stopping At Soft Limits
Post by: smurph on September 26, 2010, 02:00:03 PM

I need a GalilDebug.txt log to look at.  But looking through the code, there should be no reason for this.  All the MPG code is doing is driving an axis via an encoder and regular axis limits should apply.