Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: kingmeager on October 24, 2006, 01:12:32 AM

Title: Which Servo controller is fitted with Mach3?
Post by: kingmeager on October 24, 2006, 01:12:32 AM

hi ,Which Servo controller is fitted with Mach3?

Title: Re: Which Servo controller is fitted with Mach3?
Post by: Graham Waterworth on October 24, 2006, 02:57:27 AM

Mach uses external controllers, you can use any step and direction type you want.

Graham.

Title: Re: Which Servo controller is fitted with Mach3?
Post by: kingmeager on October 24, 2006, 08:51:45 PM

Dear Graham,

  I'm new for Mach3.I don't know where i can collect the Servo controller?

 Could you recommend to me?

 Best regards

Title: Re: Which Servo controller is fitted with Mach3?
Post by: Chaoticone on October 24, 2006, 08:57:47 PM

Check these out. Hope it helps.

http://www.geckodrive.com/

Title: Re: Which Servo controller is fitted with Mach3?
Post by: kingmeager on October 24, 2006, 10:25:46 PM

Thanks.But i need AC Servo Controller.

Title: Re: Which Servo controller is fitted with Mach3?
Post by: Brian Barker on October 24, 2006, 10:40:14 PM

www.a-m-c.com look at there Digi flex drives :) They are not cheap but they are GREAT drives!