Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Tristar500 on August 25, 2010, 10:29:58 AM

Title: Delay in Digitizing Wizard?
Post by: Tristar500 on August 25, 2010, 10:29:58 AM

Any way to change the amount of time the probe sits on the object being digitized before calling for a Z up command.

The digitizing wizard pauses for about .5 second on each point. Sounds like a small amount of time but it really adds up.

Any way around this?

Thanks, Larry