Machsupport Forum

Third party software and hardware support forums. => Mach3 and G-Rex => Topic started by: neiter13 on July 23, 2010, 09:49:01 AM

Title: Tools
Post by: neiter13 on July 23, 2010, 09:49:01 AM

How do you change and select what tool (i.e. Tool 1, Tool 2, ...) you want to use within mach 3.

Title: Re: Tools
Post by: neiter13 on July 23, 2010, 10:12:52 AM

Also I'm trying to make a part and i have all the measurements correct from the original but when i have mach 3 try and cut it, it is 1/32nd off all around. is there a offset within mach 3 that i don't know about. any ideas would be helpfull.

Thanks,

Jeff

Title: Re: Tools
Post by: jrslick22 on July 25, 2010, 05:49:45 AM

Quote from: neiter13 on July 23, 2010, 09:49:01 AM

How do you change and select what tool (i.e. Tool 1, Tool 2, ...) you want to use within mach 3.

M6 T(number)

It wouldn't kill you to read the manual.