Machsupport Forum
Mach Discussion => Mach Screens => Machscreen Screen Designer => Topic started by: 401k on July 19, 2010, 02:17:24 PM
-
Hello
I'm building a screenset from scratch. Started with page0, added image as background, added controls, DRO's etc., ... Everything works great -then I started adding pages...
Problem is that every control shows up on every page and background is always the image I set for page 0.
Also, I notice ALL items placed on page 0 are set as global - you can change the properties to "no" but they just snap back..
Items placed on other pages can be saved as non-global, and in machscreen they are hidden as you expect if you select page 0 but in mach, everything is visible no matter what page they were placed on or what page is selected
-
I figured out what I was doing wrong -
Apparently, page0 is "special" and anything on it overides the controls/backgrounds on other pages.
Once I moved everything I used to have on page0 to page1, it works as expected. (except for the soft emergency stop which seemed like a good idea to force availability on all pages)