Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: spitter on July 18, 2010, 06:19:49 PM

Title: G28 goes in reverse before going home
Post by: spitter on July 18, 2010, 06:19:49 PM

Hi, this weekend I have been trying to make4 my machine more accurate ( goofin with the steps per) but I noticed running my program that when it did the G28 X0 Y0 line it would go in the opposite direction a touch before going the right way and to home any ideas as to why or what setting I can change to make it stop going in reverse?
Scott