Machsupport Forum

Mach Discussion => Mach Screens => Machscreen Screen Designer => Topic started by: GeorgeRace on May 11, 2010, 08:45:23 PM

Title: Flashing Button State
Post by: GeorgeRace on May 11, 2010, 08:45:23 PM

I have created a set of blue buttons with white letters.  I then created the double width button necessary to have a two color button, and made the letters red on the right hand button.

They work just great, and when selected I have them flashing between white and red.  Normally white lettering when not selected.

Every now and then I will have a button that turns off the function, it quits flashing but the text remains a steady red instead of white.

Is there some way that I need to setup the information behind the LED Button so that it always shows the white type when NOT selected?

Thanks,
George

Title: Re: Flashing Button State
Post by: ger21 on May 11, 2010, 09:16:09 PM

If you're using an image button with no image, you need to use a blank transparent .png for the button image.

Title: Re: Flashing Button State
Post by: GeorgeRace on May 12, 2010, 06:30:10 AM

Quote from: ger21 on May 11, 2010, 09:16:09 PM

If you're using an image button with no image, you need to use a blank transparent .png for the button image.

Hi Gerry:

I am confused I guess.  First I place an LED and then choose the button name of the two color button I set it's action to the Function the LED is to mimic.  I then cover it with a transparent button image and assign the action to perform to the transparent button.

What am I missing in your response?
George

Title: Re: Flashing Button State
Post by: ger21 on May 12, 2010, 07:00:40 AM

can you post your transparent button image?